INFRARED THERMOMETER 5510 KYORITSU

Rp. CALL

Last Updated

21 Sep 2021

Minimum Order

Specification of INFRARED THERMOMETER 5510 KYORITSU

INFRARED THERMOMETER 5510 KYORITSU

Measuring Range	-40ºC - 300ºC
Display Resolution	0.5ºC . 1ºC for below -20ºC and over 100ºC
Measuring Accuracy	When the ambient temperature is 25 ±2ºC and the emissivity (ε) is 1, 0 - 300ºC: bigger value of either of ±1% of the measured value ±1dgt or ±2ºC ±1dgt. 0 - -30ºC: \|±3ºC ±1dgt below -30ºC: \|±5ºC ±1dgt
Repeatability	within 1ºC ±1dgt
Response	1 sec (90% response)
Measuring Diameter	(45mm/500mm(Optical sensitivity: 90%)
Collimation	Before shipment: 0.95. The value can be altered between 0.8and 1.0 with the slide switch at the lower part of the battery compartment (by 0.05 steps). Laser beam (650nm 1mW JIS class2) specifies the center.
Water-Proof Property	IP67
Auto Power Off	If no key is pressed for 30 seconds, the power is shut off automatically.
Shock Proof Property	This instrument or its function/performance will not be damaged even if it is dropped on the p tile floor from 1 meter high.
Operating Temperature	0 - 50ºC
Operating Humidity	90% rH and below (no condensation)
Storage Temperature	-20 - 55ºC (no condensation) (Note): In the case of longterm storage, the batteries should be removed.
Battery	2 AAA alkaline cell batteries
Battery Life	Approximately 10 hours for continuous use
Housing material	ABS (antibacterial)
Dimension	120 × 60 × 54mm (Maximum value for each direction)
Weight	Approx. 123g
Accessories	2 AAA Alkaline Cell Batteries Instruction Manual Strap
Approved Standard	CE marking: EMI EN61326 Class B, EMS EN61326 Annex C Stability:±5ºC under EMC test environment at 25ºC