Fluke 805 Vibration Meter
Hover to Zoom

Last Updated
06 Apr 2021
Country Origin
Minimum Order

Specification of Fluke 805 Vibration Meter

Fluke 805 Vibration Meter

Reliable, repeatable, accurate way to check the bearings and overall vibe.
Make a go or no-go decision care with confidence. Fluke 805 Vibration Meter is the most reliable vibration screening devices that are available to team problem-solving mechanic the front line that need to be repeated, the reading of the severity scale vibration pads condition overall and.
What makes available a choice of 805IK?


  • A meter-no pen-which measures the overall vibration as well as certain variables such as the condition and temperature of the bearings, to give a more complete picture.
  • The combination of vibration and power tip sensor compensates users of variance (force or angle) produces accurate, repeatable readings.
  • A four-level scale and severity of the onboard processor to calculate the bearing condition and overall vibration using easy mema

Hami textual warnings (good, Satisfactory, unsatisfactory, cannot be accepted).

  • The sensitivity of the sensor can read a wide range of frequency (10 Hz and 1000 to 4000 up to 20000 Hz) which covers most of the machinery and component types.
  • Straight forward user interface that minimizes user input for the range of RPM and the type of equipment.

Features and benefits:

  • Innovative sensor design helps minimize the variation in measurements of dis

ebabkan by the angle of the device or contact pressure

  • Quality of the data is consistent at both low and high frequency ranges
  • The four-level scale indicates the severity of the problem for bearing vibration condition overall and
  • Data export via USB
  • Trends in Microsoft ® Excel using built-in templates
  • Overall measurement of vibration (10 Hz up to 1000 Hz) for the acceleration, velocity and displacement unit penguku
  • ran for various machines
  • Crest Factor + provide reliable direct measurements using the bearing sensor tip between 4000 and 20000 Hz or Hz
  • Colored lighting system (green, red) and on the screen the comments shows how much pressure needs to be applied to measurements
  • Temperature measurement with Infrared Temperature Sensor improve diagnostic capabilities
  • The on-board memory of up to 3500 measurement
  • Audio output to listen to the tones of the pads directly
  • External accelerometer support to hard to reach locations
  • Flashlight to see the location of measurement in dark areas
  • Large high resolution screen for easy navigation and viewing

Use the 805 to check the categories the following machines:

  1. Cooling (refrigeration)
  2. Fans
  3. Cooling tower drive
  4. Sentrifuga pump
Vibration Meter
Low frequency range (overall measurement) 10 Hz to 1,000 Hz
High frequency range (CF+ measurement) 4,000 Hz to 20,000 Hz
Severity levels Good, Satisfactory, Unsatisfactory, Unacceptable
Vibration limit 50 g peak (100 g peak-peak)
A/D converter 16-bit
Signal to noise ratio 80 dB
Sampling rate
        Low frequency
        High frequency
20,000 Hz
80,000 Hz
Real time clock backup Coin battery


Sensitivity 100 mV g ± 10%
Measurement range 0.01 g to 50 g
Low frequency range (overall measurement) 10 Hz to 1,000 Hz
High frequency range 4,000 Hz to 20,000 Hz
Resolution 0.01 g
Accuracy At 100 Hz ± 5% of measured value


Amplitude Units
Acceleration g, m/sec²
Velocity in/sec, mm/sec
Displacement mils, mm


Model NameDescription
Fluke 805 Vibration Meter
Included accessories
  • USB cable
  • Storage case
  • Belt holster
  • Quick reference guide
  • CD-ROM (includes MS Excel template and documentation)
  • Two (2) AA batteries


Untuk keterangan lebih lanjut, silahkan download PDF ini :



Foto dari Pembeli

Ulasan dari Pembeli

Dengan Foto
Request a Quote
Produk Siap di Pesan
Rp 0
Logo IDT