Fluke 27-II And 28 II Industrial Multimeters

Last Updated

15 Apr 2021

Minimum Order

Specification of Fluke 27-II And 28 II Industrial Multimeters

Fluke 27 II And 28 II Industrial Multimeters

The NEW standard for rugged

The Fluke 27 II and 28 II digital multimeters define a new standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. Both meters have IP 67 (waterproof and dustproof) rating, MSHA approvals, extended operating temperature range of -15 °C to +55 °C (5 °F to 131 °F, -40 °C for up to 20 minutes) and 95 % humidity, and have been designed and tested to withstand a 3 m (10 ft) drop. The Fluke 20 Series Multimeters are built to work in the toughest environments.

Features :

Measure up to 1000 V ac and dc
Measure up to 10 A (20 A for 30 seconds)
10,000 μF capacitance range
Frequency to 200 kHz
Extended ac voltage bandwidth– 15 Hz to 20 kHz (28 II), 40 Hz to 30 kHz (27 II)
Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument (28 II)
Resistance, continuity and diode test
Min/Max and average recording to capture variations automatically
Peak min-max (28 II)
Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment (28 II)

Features:

New – IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments
Designed to withstand 3 meter drop (with holster)
Hi resolution 20,000 count display mode (28 II)
True-rms ac voltage and current for accurate measurements on non linear signals (28 II)
Average responding voltage and current for measurements (27 II)
New – Backlit keypad buttons allow for easy visibility in lowlit areas
Large display digits and 2 level bright white backlight for increased visibility
Reversible holster for added protection when not in use
Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards
Long battery life (800 hours)
Relative mode to remove test lead resistance from low ohms measurements
Auto and manual ranging for maximum flexibility
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks
MSHA approval

Accuracy specifications
DC voltage	Range 0.1 mV to 1000 V Accuracy 27-II:0.1 % +1 28-II:0.05 % + 1
AC voltage	Range 0.1 mV to 1000 V Accuracy 27-II: 0.5 % +3 28-II: 0.7 % +4
DC current	Range 0.1 μA to 10 A Accuracy 27-II: 0.2 % + 4 28-II: 0.2 % + 4
AC current	Range 0.1 μA to 10 A Accuracy 27-II: 1.5 % + 2 28-II: 1.0 % + 2
Resistance	Range 0.1 Ω to 50 MΩ
Display counts	27-II 6000 28-II 6000/19,999
Capacitance	1 nF to 9999 μF
Frequency	0.5 Hz to 199.99 kHz
Temperature	27-II: N/A 28-II: -200 °C to +1090 °C
Low pass filter (Measurement on VSD’s)	27-II: N/A 28-II: Yes
Compliance	CAT IV 600 V , CAT III 1000V
IP rating	27-II: IP 67 28-II: IP 67
Power	Three AA batteries
Battery life	800 hours

General specifications
Display	Bar graph/backlight Yes/Yes
Data storage	Peak transient capture 250 μS (28 II) Min/Max/Avg Yes Reading hold Yes
Other features	Relative readings (zero) Yes Battery type Three AA batteries
Warranty and protection	Safety rating CAT IV 600 V/CAT III 1000 V Mine Safety MSHA Approved External protection Rubber holster Drop test 10 feet drop test Dustproof/waterproof Yes, IP 67 rated Warranty Limited lifetime Size (HxWxL) with holster 6.35 cm x 10.0 cm x 19.81 cm (2.5 in x 3.93 in x 7.8 in) Weight with holster 698.5 g (1.54 lb)