Kyoritsu

DIGITAL MULTIMETERS 1018-KYORITSU 1018HSpec:• Display: 4000 counts.• Auto range.• Diode test feature.• Capacitance test feature.• Continuity test.

DIGITAL MULTIMETERS KEW 1051-1052 KYORITSUSpec:For Electrical and Electronic Troubleshootings• High Accuracy, High Performance and Reliable Measurements• Safety design for industrial use• Reliable support for data management (Only for KEW 1052)

DIGITAL MULTIMETERS KEW 1061-1062 KYORITSUSpec:High Preformance Handheld DMMs• High Accuracy, High Performance and Reliable Measurements• Safety design for industrial use• Reliable support for data management

DIGITAL MULTIMETERS KEW 2000 and 2001 KYORITSUSpec 2000: Kew• Capable of measuring AC and DC currents up to 60A with OPEN CLAMP SENSOR.• 3400 counts with bargraph display.• Pocket size and heavy duty design.Spec Kew 2001:• Capable of measuring AC and DC currents up to 100A with OPEN CLAMP SENSOR.• 3400 counts with bargraph display.• Pocket size and heavy duty design.

PORTABLE APPLIANCE TESTER 6201A KYORITSUThe KEW 6201A is a portable appliance tester, performing four functions to ensure the Safety of ClassI and ClassII appliances. And also can measure the mains voltage.Readings are displayed on a large liquid crystal display (LCD) below which are four LEDs which unambiguously display a pass or fail indication for threshold values dictated by AS/NZS 3760.This instrument is suitable for performing tests the us required by t

EARTH CLAMP TESTERS 4200/4202 KYORITSU• The earth resistance from 0.05 to 1500Ω can be measured without the auxiliary earth spikes.(The Multiple Earthing System.)• True RMSAccurate true RMS readings of AC current including distorted waveform from 1mA to 30.0A• Noise Check FunctionA function to detect current, which effects on an earth resistance measurement and display "NOISE" mark on the LCD.• Memory functionSave and display up to 100 measurement data.• Data hold function / Buzzer function / Back light function• Compliant with Safety Standards of IEC 61010-1 : CAT IV 300V Pollution degree2Note:A single earthing can not be measured. (Only for Multiple Earthing System)

INFRARED THERMOMETER 5510 KYORITSUMeasuring Range-40ºC - 300ºCDisplay Resolution0.5ºC . 1ºC for below -20ºC and over 100ºCMeasuring AccuracyWhen the ambient temperature is 25 ±2ºC and the emissivity (ε) is 1,0 - 300ºC: bigger value of either of ±1% of themeasured value ±1dgt or ±2ºC ±1dgt.0 - -30ºC: |±3ºC ±1dgtbelow -30ºC: |±5ºC ±1dgtRepeatabilitywithin 1ºC ±1dgtResponse1 sec (90% response)Measuring Diameter(45mm/500mm(Optical sensitivity: 90%)CollimationBefore shipment: 0.95. The value can be altered between 0.8and 1.0 with the slide switch at the lower part of the battery compartment(by 0.05 steps).Laser beam (650nm 1mW JIS class2) specifies the center.Water-Proof PropertyIP67Auto Power OffIf no key is pressed for 30 seconds, the power is shut off automatically.Shock Proof PropertyThis instrument or its function/performance will not be damaged even if it is dropped on the p tile floor from 1 meter high.Operating Temperature0 - 50ºCOperating Humidity90% rH and below (no condensation)Storage Temperature-20 - 55ºC (no condensation)(Note): In the case of longterm storage, the batteries should be removed.Battery2 AAA alkaline cell batteriesBattery LifeApproximately 10 hours for continuous useHousing materialABS (antibacterial)Dimension120 × 60 × 54mm (Maximum value for each direction)WeightApprox. 123gAccessories2 AAA Alkaline Cell BatteriesInstruction ManualStrapApproved StandardCE marking: EMI EN61326 Class B, EMS EN61326 Annex CStability:±5ºC under EMC test environment at 25ºC

TEST LEAD 7067-1, 100 mmAccessories: 7067Applicable models: 2805Place of Origin: JapanBrand Name: KyoritsuProduct Code: Kew 7067

LOOP/PSC TESTERS 4118A KYORITSULoop Impedance Ranges20/200/2000ΩLoop ImpedanceAccuracy±2%rdg±4dgtAC Test Current20Ω 25A200Ω 2.3A2000Ω 15mAAC Test Period20Ω (20ms)200Ω (40ms)2000Ω (280ms)PSC Ranges200A (2.3A 40ms)2000A (25A 20ms)20kA (25A 20ms)PSC Ranges AccuracyConsider accuracy of Loop impedanceVoltage110V-260V ±2%rdg±4dgtOperating Voltage230V+10% -15% (195V - 253V) 50HzSafety StandardIEC 61010-1 CAT III 300VIEC 61557-1,-3IEC 61010-2-031 Pollution Degree 2IP RatingIEC 60529-IP54Dimensions185(L) × 167(W) × 89(D)mmWeight750g approx.AccessoriesMolded plug test leads7121B (Simplified measurement probe)Pouch for test leadsShoulder StrapInstruction Manual

COMPACT POWER METER KYORITSU 6305• Comprehensive real-time monitoring, recording and analysis of single and 3-phase systems• Voltage, Current, Power Factor and Frequency measurements• Power analysis (Active, Reactive and Apparent power)• Energy analysis (Active, Reactive and Apparent power)• Active power accuracy: ± 0.3% rdg ± 0.2% of Porto• Automatic wiring check function to prevent incorrect connections• Large memory capability (